| |
|
| Instructions: |
|
| Step 1. |
You will need a journal book. Then you will have to take off the covers. I use needle nose pliers and I bend it open just enough to pull the covers off. |
| Step 2. |
Measure the covers height and width. Go to you favorite program and design the front and back covers. Don’t forget to add 1”inch all the way around your design.
|
| Step 3. |
Now design the inside front and back. I subtract 1/2”inch all the way around the insides. |
| Step 4. |
Print and cut. Line up the front cover with your designed paper try to center as good as you can. Flip it over so you see the journals inside cover and back side of your design. Take one corner and glue it down do that all the way around. Now glue the sides. You now have the front cover on. Do the same thing for the back…. |
| Step 5. |
Take the inside designs and glue them down.
|
| Step 6. |
You will have to punch holes on both covers. It is good to embellish now.
|
| Step 7. |
You’re ready to put the covers back on double check that you have the covers on right. It took me a couple of tries. Take the needle nose pliers and bend the coils back to the way they were.
|
| Step 8. |
You’re done. (Easy)
|
**Submit your project idea to projects@pccrafter.com |
| |
